onsemiUnited States
OPTOISO 4.17KV OPN COLL 6DIP
6-pin DIP high-speed optocoupler with Schmitt trigger output, 4170 VAC RMS isolation voltage, 1 MHz typical data rate, for logic isolation and noise immunity.Checked against the datasheet
All alternatives
View full reportTechnical parameters
Datasheet-verified parameters
15 items| Parameter | Value and test conditions | Source |
|---|---|---|
| Package | DIP 6-Pin | |
| Input-Output Isolation Voltage | 4170 VAC RMS, t = 1 Minute | |
| Isolation Capacitance | 0.4 to 0.6 pF, $V_{I-O} = 0 V, f = 1 MHz$ | |
| Isolation Resistance | $10^{11}$ Ω, $V_{I-O} = ± 500 VDC, T_A = 25°C$ | |
| Turn-On Threshold Current | Max 5.0 mA, $R_L = 270 Ω, V_{CC} = 5 V$ | |
| Turn-Off Threshold Current | Min 0.3 mA, Typ 1.0 mA, $R_L = 270 Ω, V_{CC} = 5 V$ |
All parameters (22)
| Power | |
|---|---|
| Current - DC Forward (If) (Max) | 30mA |
| Current - Output / Channel | 50 mA |
| Number of Channels | 1 |
| Voltage - Forward (Vf) (Typ) | 1.2V |
| Voltage - Isolation | 4170Vrms |
| Voltage - Supply | 3V ~ 15V |
| AC and DC characteristics | |
| Propagation Delay tpLH / tpHL (Max) | 4µs, 4µs |
| Rise / Fall Time (Typ) | 100ns, 100ns |
| Environment and package | |
| Mounting Type | Through Hole |
| Operating Temperature | -40°C~85°C |
| Package | Tube |
| Package / Case | 6-DIP (0.300", 7.62mm) |
| Supplier Device Package | 6-DIP |
| Other | |
| Base Product Number | H11L3 |
| Common Mode Transient Immunity (Min) | - |
| Data Rate | 1MHz |
| Inputs - Side 1/Side 2 | 1/0 |
| Input Type | DC |
| Mfr | onsemi |
| Output Type | Open Collector |
| Product Status | Active |
| Series | - |
Pinout and package
SCHEMATIC
| Pin | Name | Function | Source |
|---|---|---|---|
| 1 | Anode | ||
| 2 | Cathode | ||
| 3 | No Connection | ||
| 4 | Output (VO) | ||
| 5 | Ground (GND) | ||
| 6 | Supply Voltage (VCC) |
Documents
Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.