SOT (DDC) 6 Pins LMR16006 TSOT…

SOT (DDC) 6 Pins LMR16006 TSOT…

Texas InstrumentsUnited States

LMR16006XDDC

Voltage Regulators - DC DC Switching RegulatorsSOT-6L

IC REG BUCK 60V 0.6A 6-SOT

LMR16006XDDC is a 60V input, 600mA output buck regulator in SOT-6L package with 0.7MHz switching frequency, ECO mode, and internal compensation.Checked against the datasheet

See alternativesAsk AI FAEDatasheet PDF

All alternatives

View full report

3 alternatives on file, including 1 Chinese alternatives. Sign in to view them.

Technical parameters

Key specs

Input voltage4 ~ 60 V
Output current600 mAMax
Switching frequency700 kHz

Datasheet-verified parameters

21 items
ParameterValue and test conditionsSource
Input Voltage Range4 V to 60 V
Output Currentup to 600 mA
Switching Frequency0.7 MHz (X version)
PackageSOT-6L (DDC)
Operating Temperature-40 °C to 125 °C
RoHSYes
Quiescent CurrentTyp 28 µA (no load, VIN=12 V)
Shutdown CurrentTyp 1 µA, Max 3 µA (VEN=0 V)
Feedback VoltageMin 0.747 V, Typ 0.765 V, Max 0.782 V
Peak Current LimitTyp 1200 mA, Max 1700 mA (VIN=12 V, TJ=25°C)
High-Side MOSFET On-ResistanceTyp 900 mΩ (VIN=12 V, CB to SW=5.8 V)
Undervoltage Lockout ThresholdRising 4 V, Falling 3 V
Thermal Shutdown Threshold170 °C
Absolute Maximum Rating - Input VoltageVIN to GND: -0.3 V to 65 V
Absolute Maximum Rating - Junction Temperature-40 °C to 150 °C
Recommended Operating Condition - Input Voltage4 V to 60 V
Recommended Operating Condition - Junction Temperature-40 °C to 125 °C
Storage Temperature-55 °C to 165 °C
ESD Human Body Model2000 V
ESD Charged Device Model500 V
Enable Pin ThresholdRising Typ 1.05 V, Min 1.25 V, Max 1.38 V
All parameters (8)ExpandCollapse
Power
Feedback Voltage0.765 V (Typ)
Input Voltage Range4 V to 60 V
Output Current600 mA
Shutdown Current1 µA
Standby Current28 µA
AC and DC characteristics
Switching Frequency0.7 MHz and 2.1 MHz
Environment and package
Operating Junction Temperature Range-40 °C to 125 °C
PackageSOT-6L

Pinout and package

SOT (DDC) 6 Pins LMR16006 TSOT…
SOT (DDC) 6 Pins LMR16006 TSOT…
Package: SOT-6L (DDC)
PinNameFunctionSource
1CB- Switch FET gate bias voltage. Connect Cboot cap between CB and SW.
2GND- Ground connection.
3FB- Feedback Input. Set feedback voltage divider ratio with VOUT = VFB (1+(R1/R2)).
4SHDN- Enable and disable input (high voltage tolerant). Internal pull-up current source. Pull below 1.25 V to disable. Float to enable.
5VIN- Power input voltage pin. Input for internal supply and drain node input for internal high-side MOSFET.
6SW- Switch node. Connect to inductor, diode, and Cboot cap.

Documents

DatasheetDatasheet · 833.1 KB · 2026-10-27
Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.