LOWPOWER(微源半导体)China
The LP4023 is a standalone 1-cell switching battery charger providing up to 2A charge current to the battery from 4.1V to 6.2V input voltage. The charge current is programmable by a resistor connected from lSET to GND. The charge can be enabled and disabled from lSET pin. The LP4023 operates at 1.2MHz switching frequency allowing a small-size 1uH inductor for 2A fast charging. The LPS patent-protected integrated current sensing and control technique eliminates external sensing resistor and allows high charge efficiency, low BOM cost and very small footprint.
All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| 工作电压(V) | 4.1-28 |
| 最大充电电流(mA) | 2000 |
| 电池电压(V) | 4.2/4.35 |
| Environment and package | |
| 温度检测 | Y |
| Other | |
| PG | - |
| 产品特征/功能 | Small solution footprint, 1uH inductor, current sensorless,high standing input voltage, TREG, OTP, OCP, NTC |
| 使能控制 | - |
| 充满状态指示 | - |
| 充电状态指示 | Y |
| 充电类型 | Buck Charger |
| 电池节数 | 1 |
| 过压保护(V) | 6.4 |