All alternatives

View full report

6 alternatives on file. Sign in to view them.

Technical parameters

Key specs

Input voltage3.6 ~ 15 V
Output voltage600 mV
Output current3 AMax
Switching frequency500 kHz ~ 4 MHz

Datasheet-verified parameters

22 items
ParameterValue and test conditionsSource
Input Voltage Range3.6V to 15V
Output Voltage0.6V Reference Allows Low Output Voltages
Output Current3A per Channel
Switching Frequency500kHz to 4MHz
Package28-Lead (4mm × 5mm) Plastic QFN
Operating Temperature Range-40°C to 125°C
GradeE (Commercial)
RoHSLead Free Finish
Absolute Maximum Ratings - Input VoltageVIN1, VIN2: –0.3V to 16V
Absolute Maximum Ratings - Operating Temperature–40°C to 125°C
Storage Temperature Range–65°C to 125°C
EfficiencyUp to 95%
Low Duty Cycle Operation5% at 2.25MHz
Phase SelectSelectable 0°/180° Phase Shift Between Channels
Operating ModeUser Selectable Burst Mode Operation or Forced Continuous Operation
Protection FeaturesShort-Circuit Protected, Overvoltage Input and Overtemperature Protection
Internal Linear RegulatorLow Power 2.5V Linear Regulator Output
Power Good OutputPower Good Status Outputs Available
Thermal ResistanceθJA = 43°C/W (QFN)
Minimum Off-TimeTypically 40ns
Minimum On-TimeTypically 20ns
Overtemperature Protection ThresholdTurns off at ~150°C, returns at 140°C
All parameters (21)ExpandCollapse
Power
Current - Output3A
Voltage - Input (Max)15V
Voltage - Input (Min)3.6V
Voltage - Output (Max)14.7V
Voltage - Output (Min/Fixed)0.6V
AC and DC characteristics
Frequency - Switching500kHz ~ 4MHz
Environment and package
Mounting TypeSurface Mount
Operating Temperature-40°C~125°C(TJ)
PackageTape & Reel (TR); Cut Tape (CT); Digi-Reel®
Package / Case28-WFQFN Exposed Pad
Supplier Device Package28-QFN (4x5)
Other
Base Product NumberLTC3633
FunctionStep-Down
MfrAnalog Devices Inc.
Number of Outputs2
Output ConfigurationPositive
Output TypeAdjustable
Product StatusActive
Series-
Synchronous RectifierYes
TopologyBuck

Pinout and package

UFD PACKAGE 28-LEAD (4mm × 5mm…
UFD PACKAGE 28-LEAD (4mm × 5mm…
Package: 28-Lead (4mm × 5mm) Plastic QFN
PinNameFunctionSource
1PGOOD1: Channel 1 Open-Drain Power Good Output Pin
2PHMODE: Phase Select Input
3VIN1: Channel 1 Input Voltage Pin
4MODE/SYNC: Mode Select/Synchronization Pin
5RT: Switching Frequency Set Pin
6RUN2: Channel 2 Run Control Pin
7SGND: Signal Ground Pin
8PGOOD2: Channel 2 Open-Drain Power Good Output Pin
9VIN2: Channel 2 Input Voltage Pin
10VIN2: Channel 2 Input Voltage Pin
11VFB2: Channel 2 Output Feedback Voltage Pin
12TRACKSS2: Channel 2 Output Tracking and Soft-Start Input Pin
13ITH2: Channel 2 Current Sense/Compensation Pin
14VON2: Channel 2 Top MOSFET Gate Drive Pin
15SW2: Channel 2 Switch Node Pin
16SW2: Channel 2 Switch Node Pin
17BOOST2: Channel 2 Bootstrap Capacitor Pin
18V2P5: 2.5V Regulator Output
19INTVCC: Internal 3.3V Regulator Output
20BOOST1: Channel 1 Bootstrap Capacitor Pin
21VIN1: Channel 1 Input Voltage Pin
22VIN1: Channel 1 Input Voltage Pin
23SW1: Channel 1 Switch Node Pin
24SW1: Channel 1 Switch Node Pin
25VON1: Channel 1 Top MOSFET Gate Drive Pin
26ITH1: Channel 1 Current Sense/Compensation Pin
27TRACKSS1: Channel 1 Output Tracking and Soft-Start Input Pin
28VFB1: Channel 1 Output Feedback Voltage Pin
29PGND: Power Ground Pin (Exposed Pad)

Documents

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.