All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Operation voltage (Vp) | 21.6 to 26.4 |
| Starting current (A) | 1.3 |
| AC and DC characteristics | |
| Cut frequency (cut/min) max | 30 |
| Resolution (dots/mm) | 8 |
| Environment and package | |
| Dimensions (W×D×H mm) | 127.6 × 83.0 × 44.1 (55.95 with auto cutter)*2 |
| Operating temperature (˚C) | 0 to 50 |
| Thermal printer | LTP04-347 |
| Other | |
| Abrasion resistance (km) | 150*1 |
| Cutting pitch (mm) min | 10 |
| Cutting type | Partial cut (Leave center point) |
| Detector (control switch) | 3.0 to 5.0 |
| Life (Cut) | 2,000,000*4 |
| Mass (g) | Approx. 400 |
| Model | LTP04-347 |
| Motor | 1.0 |
| Number of dots/line | 576 |
| Operating time (sec/cycle) max | 0.4 (24V) |
| Out of paper | By photo interrupter |
| Paper thickness (μm) | 60 to 80*3 |
| Paper width (mm) | 80 |
| Platen position | By mechanical switch |
| Printing width (mm) | 72 |
| Speed (mm/sec) max | 250 |
Documents
No documents are linked to this part yet.