u-bloxSwitzerland

NEO-M8N-0

ActiveRF Receivers24-pin LCC

RF RCVR GNSS/GPS 1.575GHZ 24LCC

u-blox NEO-M8N is a GNSS module supporting concurrent reception of GPS, Galileo, GLONASS, and BeiDou, featuring a 24-pin LCC package, operating temperature of -40°C to +85°C, and compliance with AEC-Q100 and RoHS standardsChecked against the datasheet

See alternativesAsk AI FAEDatasheet PDF

All alternatives

View full report

Technical parameters

Datasheet-verified parameters

16 items
ParameterValue and test conditionsSource
Package24-pin LCC (16.0 x 12.2 x 2.4 mm)
Operating temperatureMin: -40 °C, Max: 85 °C
GradeAutomotive (AEC-Q100 qualified GNSS chips)
RoHSCompliant with Directives 2011/65/EU and 2015/863/EU
Power supply voltage (NEO-M8N)Min: 2.7 V, Typ: 3.0 V, Max: 3.6 V
Supply voltage USBMin: 3.0 V, Typ: 3.3 V, Max: 3.6 V
Backup battery voltageMin: 1.4 V, Max: 3.6 V
Absolute maximum rating - Power supply voltageMin: -0.5 V, Max: 3.6 V
Absolute maximum rating - Storage temperatureMin: -40 °C, Max: 85 °C (NEO-M8N)
Receiver chain noise figureTyp: 2.0 dB
GNSS systems supportedGPS/QZSS, GLONASS, Galileo, BeiDou (3 concurrent)
InterfacesUART, USB, SPI, DDC (I2C compliant)
Oscillator typeTCXO
Firmware versionFlash FW SPG 3.01
WeightTyp: 1.0 g
CertificationAEC-Q100, ISO 16750
All parameters (20)ExpandCollapse
Power
Current - Receiving21mA
Voltage - Supply1.65V ~ 3.6V
AC and DC characteristics
Frequency1.575GHz
Environment and package
Memory Size-
Mounting TypeSurface Mount
Operating Temperature-40°C~85°C
PackageTape & Reel (TR); Cut Tape (CT); Digi-Reel®
Package / Case24-SMD Module
Supplier Device Package-
Other
Antenna Connector-
ApplicationsGeneral Purpose
Base Product NumberNEO-M8
Data InterfaceI2C, SPI, UART, USB
Data Rate (Max)-
Features-
Mfru-blox
Modulation or ProtocolBeiDou, Galileo, GLONASS, GNSS, GPS
Product StatusActive
Sensitivity-167dBm
SeriesNEO-M8

Pinout and package

Package24-pin LCC (16.0 x 12.2 x 2.4 mm)

PinNameFunctionSource
1SAFEBOOT_N(Reserved for future service, updates and reconfiguration, leave OPEN)
2D_SEL(Interface select)
3TIMEPULSE(Time pulse 1PPS)
4EXTINT(External interrupt pin)
5USB_DM(USB data)
6USB_DP(USB data)
7VDD_USB(USB supply)
8RESET_N(Reset)
9VCC_RF(Output voltage RF section)
10GND(Ground)
11RF_IN(GNSS signal input)
12GND(Ground)
13GND(Ground)
14LNA_EN(Antenna/LNA control)
15Reserved
16Reserved
17Reserved
18SDA/ SPI CS_N (DDC data or SPI chip select)
19SCL/ SPI CLK (DDC clock or SPI clock)
20TXD/ SPI MISO (Serial port or SPI MISO)
21RXD/ SPI MOSI (Serial port or SPI MOSI)
22V_BCKP(Backup voltage supply)
23VCC(Supply voltage)
24GND(Ground)

Documents

DatasheetDatasheet · 1.0 MB · 2026-10-29
Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.