onsemiUnited States

The NLSX5004 is 4−bit configurable dual−supply autosensing bidirectional level translator that do not require direction control pins. The A− and B−ports are designed to track two different power supply rails, V CCA and V CCB respectively.Both the V CCA and the V CCB supply rails are independently−configurable from 0.9 V to 3.6 V.The NLSX5004 has high dynamic output current capability, allowing the translators to drive high capacitive loads.Enable input pins are available to reduce the power consumption.These pins may be used to disable both A− and B−ports by putting them in 3−state significantly reducing the supply current from both V CCA and V CCB . These pins are referenced to the V CCA supply. The NLSX5004 has an active−High enable (EN). Product services, tools and other useful resources related to NLSX5004 Find and compare products, get support and connect with onsemi sales team. Note: The temperature and confidence level may be adjusted to your requirements. Disclaimer: A reliability FIT rate calculated using this tool shall not be used for any functional safety purpose. In case a raw FIT rate needs to be estimated for a component which is targeted to be used in a safety critical application (i.e. compliant to ISO 26262 standard) it should be calculated according to generic safety standards (IEC62380, IEC61709, SN29500, FIDES, etc.)