OPA2134PA

ActiveInstrumentation, OP Amps, Buffer AmpsPDIP

IC AUDIO 2 CIRCUIT 8DIP

OPA2134PA is a dual-channel high-performance audio operational amplifier in an 8-pin PDIP package, operating from -40°C to +85°C, featuring ultra-low distortion, low noise, and a FET input stage for professional audio applications.Checked against the datasheet

See alternatives Ask AI FAEDatasheet PDF

All alternatives

View full report

19 alternatives on file. Sign in to view them.

Technical parameters

Key specs

Supply voltage5 ~ 36 V

Gain bandwidth product8 MHzTyp

Input offset voltage3.5 mVMax · Max ±3.5 mV (at TA = 25°C)，Max ±1 mV (at TA = -40°C to +85°C)

Quiescent current5 mAMax · IO=0mA)

Channels2

Datasheet-verified parameters

19 items

Parameter	Value and test conditions	Source
Supply voltage range	Dual supply: Min ±2.5V, Nom ±15V, Max ±18V; Single supply: Min 5V, Nom 30V, Max 36V
Gain bandwidth product	Typ 8 MHz
Input offset voltage	Typ ±1 mV, Max ±3.5 mV (at TA = 25°C); Max ±1 mV (at TA = -40°C to +85°C)
Quiescent current	Min 4 mA, Max 5 mA (per amplifier, IO=0mA)
Channel count	Dual
Package	PDIP (P), 8 Pins
Operating temperature	-40°C to +85°C
RoHS	Yes
Recommended Operating Conditions	VS: Dual ±2.5V to ±18V, Single 5V to 36V; TA: -40°C to +85°C
Absolute Maximum Ratings	VS: 36V; Input Voltage: (V-) - 0.5V to (V+) + 0.5V; Input Current: ±10mA; TA: -40°C to 125°C; TJ: 150°C; Tstg: -55°C to 125°C
Slew rate	Typ ±20 V/μs
Open-loop voltage gain	Min 104 dB, Typ 120 dB (RL = 2kΩ)
Input bias current	Typ ±5 pA, Max ±100 pA (at TA = 25°C)
Input voltage noise density	Typ 8 nV/√Hz (at f = 1kHz)
Total harmonic distortion plus noise	Typ 0.00008% (f = 1kHz, G = 1, VO = 3Vrms, RL = 2kΩ)
Power-supply rejection ratio	Min 90 dB, Typ 106 dB (5V ≤ VS ≤ 36V)
Common-mode rejection ratio	Min 86 dB, Typ 100 dB (-12.5V ≤ VCM ≤ 11.5V)
Short-circuit current	Sourcing 36 mA, Sinking -30 mA
Electrostatic discharge	HBM ±2000 V (OPA2134 in PDIP Package)

All parameters (20)ExpandCollapse

Power
Current - Input Bias	5 pA
Current - Output / Channel	35 mA
Current - Supply	4mA (x2 Channels)
Voltage - Supply Span (Max)	36 V
Voltage - Supply Span (Min)	5 V
AC and DC characteristics
Gain Bandwidth Product	8 MHz
Slew Rate	20V/µs
Voltage - Input Offset	500 µV
Environment and package
Mounting Type	Through Hole
Operating Temperature	-40°C~85°C
Package	Tube
Package / Case	8-DIP (0.300", 7.62mm)
Supplier Device Package	8-PDIP
Other
Amplifier Type	Audio
Base Product Number	OPA2134
Mfr	Texas Instruments
Number of Circuits	2
Output Type	-
Product Status	Active
Series	SoundPlus™

Pinout and package

Figure 4-2. OPA2134: D Package… — Package: **PDIP (P), 8 Pins**

Pin	Name	Function
1	OUT	A, Output, channel A
2		-IN A, Inverting input, channel A
3		+IN A, Noninverting input, channel A
4		V-, Negative (lowest) power supply
5		+IN B, Noninverting input, channel B
6		-IN B, Inverting input, channel B
7	OUT	B, Output, channel B
8		V+, Positive (highest) power supply

Documents

DatasheetDatasheet · 1.4 MB · 2026-10-26

Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.