RFM95/96/97/98(W)

RFM95W-868S2

RF Transceiver Modules and Modems16*16mm

IC RF TXRX MODULE LORA 868MHZ SMD

RFM95W-868S2 is a LoRa long-range low-power transceiver module operating at 868/915 MHz, with a maximum output power of +20 dBm, sensitivity down to -148 dBm, and a 16x16mm package.Checked against the datasheet

See alternatives Ask AI FAEDatasheet PDF

All alternatives

View full report

Technical parameters

Datasheet-verified parameters

20 items

Parameter	Value and test conditions	Source
Package	*1616mm**
Operational temperature range	Min: -20 °C, Max: +70 °C
Supply voltage	Min: 1.8 V, Max: 3.7 V
Frequency Range	868/915 MHz
Spreading Factor	6 - 12
Bandwidth	7.8 - 500 kHz
Effective Bitrate	.018 - 37.5 kbps
Est. Sensitivity	-111 to -148 dBm
Maximum link budget	168 dB
RF output power	+20 dBm (100 mW)
RX current	10.3 mA
Register retention current	200 nA
IIP3	-12.5 dBm
RSSI Dynamic Range	127 dB
Packet engine size	256 bytes
Absolute Maximum Supply Voltage	Min: -0.5 V, Max: 3.9 V
Absolute Maximum Temperature	Min: -55 °C, Max: +115 °C
Absolute Maximum Junction Temperature	Max: +125 °C
Absolute Maximum RF Input Level	Max: +10 dBm
Load capacitance on digital ports	Max: 25 pF

Pinout and package

Figure 2. Pin Diagrams — Package: **16*16mm**

Pin	Name	Function	Source
1		GND, Ground
2		MISO, SPI Data output
3		MOSI, SPI Data input
4		SCK, SPI Clock input
5		NSS, SPI Chip select input
6		RESET, Reset trigger input
7		DIO5, Digital I/O, software configured
8		GND, Ground
9		ANT, RF signal output/input
10		GND, Ground
11		DIO3, Digital I/O, software configured
12		DIO4, Digital I/O, software configured
13		3.3V, Supply voltage
14		DIO0, Digital I/O, software configured
15		DIO1, Digital I/O, software configured
16		DIO2, Digital I/O, software configured

Documents

DatasheetDatasheet · 1.9 MB · 2026-11-03

Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.