FERRITE CORE T25-18 17 nH/N2
Micrometals T25-18 ferrite core, OD 6.48 mm, ID 3.05 mm, Ht 2.44 mm, Ae 0.0370 cm², AL 17 nH/N², epoxy coating, 20,000 pcs/box.Checked against the datasheet
All alternatives
View full reportTechnical parameters
Datasheet-verified parameters
30 items| Parameter | Value and test conditions | Source |
|---|---|---|
| OD (nom. - bare core) | 6.48 mm / 0.255 in | |
| OD (max. - after coating) | 6.86 mm / 0.270 in | |
| ID (nom. - bare core) | 3.05 mm / 0.120 in | |
| ID (min. - after coating) | 2.67 mm / 0.105 in | |
| Ht (nom. - bare core) | 2.44 mm / 0.096 in | |
| Ht (max. - after coating) | 2.95 mm / 0.116 in |
All parameters (10)
| Ae -Eff. Mag. Cross Section | 0.0370 cm2 |
| A_L tolerance | ±10% |
| A_L value (nominal) | 17 nH/N2 |
| Core Loss (maximum) | 53 mW/cm3 |
| Core Loss (nominal) | 46 mW/cm3 |
| Ht (nom. - bare core) | 2.44 mm |
| ID (nom. - bare core) | 3.05 mm |
| Le -Eff. Mag. Path Length | 1.50 cm |
| OD (nom. - bare core) | 6.48 mm |
| Ve -Eff. Core Volume | 0.0550 cm3 |
Documents
Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.