All alternatives

View full report

4 alternatives on file. Sign in to view them.

Technical parameters

Datasheet-verified parameters

21 items
ParameterValue and test conditionsSource
PackageSIL9P (plastic single in-line power package; 9 leads)
Operating case temperature-40 °C to +70 °C
Storage temperature-55 °C to +150 °C
Supply voltage (operating)Min 6 V, Typ 18 V, Max 18 V
Supply voltage (limiting)Min -0.3 V, Max +18 V (operating); Max +25 V (no signal)
Output powerMin 13 W, Typ 15 W (THD = 10%; RL = 8 Ω; VCC = 18 V)
Voltage gainMin 31 dB, Typ 32 dB, Max 33 dB
Total harmonic distortionTyp 0.03 %, Max 0.1 % (P0 = 1 W)
Supply voltage ripple rejectionMin 50 dB
Quiescent supply currentTyp 18 mA, Max 28 mA (VCC = 18 V; RL = ∞)
Standby supply currentMax 10 μA (VMODE = VCC)
DC output voltageTyp 9 V
Differential output voltage offsetMax 200 mV
Mode selection input voltage (operating)Min 0 V, Max 0.5 V
Mode selection input voltage (mute)Min 2.5 V, Max VCC - 1.5 V
Mode selection input voltage (standby)Min VCC - 0.5 V, Max VCC
Mode selection input currentMax 20 μA (0 < VMODE < VCC)
Repetitive peak output currentMax 2 A
Input voltageMin -0.3 V, Max VCC + 0.3 V
Protection featuresShort-circuit protected to ground, supply and across the load; Thermally protected
Data sheet statusPreliminary specification
All parameters (7)ExpandCollapse
Power
output power15 W (Typ)
quiescent supply current18 mA (Typ)
supply voltage18 V (Max)
AC and DC characteristics
total harmonic distortion0.03 % (Typ)
voltage gain32 dB (Typ)
Environment and package
operating case temperature-40 °C to +70 °C
PackageSIL9P

Pinout and package

Fig 2. Pin configuration.
Fig 2. Pin configuration.
Package: SIL9P (plastic single in-line power package; 9 leads)
PinNameFunctionSource
valueEnNot connected

Documents

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.