FORTUNE(富晶)

The FS9932 is a high performance, low cost CMOS 8-bit single chip microcontroller with an embedded 2kx16 bit ROM, a 6-channel 14-bit fully differential input analog to digital converter, a low noise amplifier, and a 4 x 12 LCD driver. The FS9932 is best suited for applications such as low cost body scale, barometer, hygrometer, etc.

FS9952_LP2 is a high performance, low power consumption and 3½ digits (1999 Counts) Analog to Digital Converter that built-in the microprocessor (ADC+MCU). It includes the 8 bits microprocessor, low noise and high stability OPAMP, AC rectifier OPAMP, voltage promotion and regulated voltage power, high regulated bandgap, auto measurement switch and function control circuit, buzzer driver circuit, clock oscillation circuit, backlight display control/driver circuit, LCD display driver circuit and so on. With the microprocessor, FS9952_LP2 can do the logic function control when goes through the I/O ports. By using the codes of MEA1〜MEA4 pins, it can assemble various measurement functions, as well as construct fully auto measurement meter and fully manual measurement meter through the code settings. For the settings of Range, Select, Manual Hold, Max Hold, BLCTR and Power ON/OFF keys, you can act the measurement mode select, function switch, reading hold, backlight display, power on/off and so on functions by triggering these keys. FS9952_LP2 has the AC/DC and ℉/ ℃ power on first select function that is decided by SELECT1 status. This is for the convenience of user to enter the required measurement mode during power on. With regard to the auto power off function, when there is no action within 15 minutes on the switch or keys of the meter, the system will enter the sleep mode automatically to save the power. If it is not necessary to use the auto power off function in the process of using the meter, it can be cancelled during using. FS9952_LP2 is made by large integrated circuit technology so that rise greatly up the reliability of the product, and make the design be simple and the volume be small. With small operating voltage and low power consumption, it is convenient to use the power supply of battery, especially suitable for the use on the palm mode meter. FS9952_LP2 is truly a microprocessor-embedded and multifunctional measuring ADC so that just less external components added, it can be a high accuracy, lots functions and low cost measuring meter.

FS9952_LP1 is a high performance, low power consumption and 31/2 digits (1999 Counts) Analog to Digital Converter that built-in a microprocessor (ADC+MCU). It contains 8-bits microprocessor, low noise OPAMP, high regulated bandgap, regulator, measurement switch, function control circuit, buzzer driver, oscillation circuit, backlight display control/driver circuit, LCD display driver and so on. Due to FS9952_LP1 has a embedded microprocessor so that can control the logic function, assemble various measurement functions. Through the setting to the code can build a fully auto measurement meter and a fully manual measurement meter. FS9952_LP1 has a AC/DC and ℉/℃ select function. This is convenience for user to enter the required measurement mode.

FS9922_DMM4 is a high performance, low power consumption and 34/5 digits (4000 Counts) Analog to Digital Converter that built-in a microprocessor (ADC+MCU). It contains 8-bits microprocessor, low noise OPAMP, high regulated bandgap, regulator, auto measurement switch, function control circuit, buzzer driver, oscillation circuit, backlight display control/driver circuit, LCD display driver and so on. Built-in dual Analog to Digital Converter, one is a high accuracy ADC for main measurement; the other is a high speed ADC whose measurement result shows by a 41 segment analog section bar that can respond fast. Due to FS9922_DMM4 has an embedded microprocessor so that can control the logic function, assemble various measurement functions.

FS9922_DMM3 is a high performance, low power consumption and 34/5 digits (4000 Counts) Analog to Digital Converter that built-in a microprocessor (ADC+MCU). It contains 8-bits microprocessor, low noise OPAMP, high regulated bandgap, regulator, auto measurement switch, function control circuit, buzzer driver, oscillation circuit, backlight display control/driver circuit, LCD display driver and so on. Built-in dual Analog to Digital Converter, one is a high accuracy ADC for main measurement; the other is a high speed ADC whose measurement result shows by a 41 segment analog section bar that can respond fast. Due to FS9922_DMM3 has an embedded microprocessor so that can control the logic function, assemble various measurement functions.

The FS98O24 is an 8-bit RISC-like microcontroller with 4k x 16 bits OTP program memory, auto range DMM function network, one 14-bit fully differential input analog to digital converter, two low noise amplifiers, and 4 COM x 20 SEG LCD driver. The FS98O24 is best suitable for applications such as 3 3/4 DMM and other measurement instrument products.

FS9721_LP3 is a high performance, low power consumption and 33/4 digits (4000 Counts) Analog to Digital Converter that built-in a microprocessor (ADC+MCU). It contains 8-bits microprocessor, low noise OPAMP, high regulated bandgap, regulator, auto measurement switch, function control circuit, buzzer driver, oscillation circuit, backlight display control/driver circuit, LCD display driver and so on. Due to FS9721_LP3 has an embedded microprocessor so that can control the logic function, assemble various measurement functions. Through the setting to the code can build a fully auto measurement meter. FS9721_LP3 takes low power voltage to reach low consumption and is convenient to use the power supply of battery, especially is proper for use on the palm mode meter.

The FS9912 is a high performance, low cost CMOS 8-bit single chip microcontroller with embedded a 4kx16 bits ROM, an 8-channel 14-bit fully differential input analog to digital converter, low noise amplifier, and 4x16 LCD driver. The FS9912 is best suited for applications such as low cost, high performance digital thermometer, ear thermometer, scale, barometer, and hygrometer.

The FS98O02 is a high performance, low cost 8-bit MCU with 2k program EPROM, 128-byte data RAM, one 14-bit ADC, 12-bit GIO, and 4 × 12 LCD driver. With a few external passive components such as resistors and capacitors, the FS98O02 can be easily implemented to form a simple portable tire gauge, voltage panel meter, or manual range DMM, etc. Especially, FS98O02’s EPROM could be written by program instruction, so users can write table or calibration data in the unused EPROM address more than one time.

The FS98O25 is a CMOS 8-bit single chip microcontroller(MCU) with embedded a 8kx16 bits one-time programmable (OTP) ROM, a 8-channel 14-bit fully differential input analog to digital converter, low noise amplifier, and 4 x 32 LCD driver. The FS98O25 is best suited for applications such as electrical scale, meter, and sensor or transducer measurement application, etc.

The FS98O23 is a CMOS 8-bit single chip microcontroller(MCU) with embedded a 8kx16 bits one-time programmable (OTP) ROM, a 12-channel 14-bit fully differential input analog to digital converter, low noise amplifier, and 4 x 40 LCD driver. The FS98O23 is best suited for applications such as electrical scale, meter, and sensor or transducer measurement application etc.

The FS98O22 is a CMOS 8-bit single chip microcontroller(MCU) with embedded a 4kx16 bits one-time programmable (OTP) ROM, a 8-channel 14-bit fully differential input analog to digital converter, low noise amplifier, and 4 x 20 LCD driver. The FS98O22 is best suited for applications such as electrical scale, meter, and sensor or transducer measurement application etc.

The FS98O21 is a CMOS 8-bit single chip microcontroller(MCU) with embedded a 2kx16 bits one-time programmable (OTP) ROM, a 6-channel 14-bit fully differential input analog to digital converter, low noise amplifier, and 4 x 12 LCD driver. The FS98O21 is best suited for applications such as electrical scale, meter, and sensor or transducer measurement application etc.

The FS98O01 is a high performance, low cost 8-bit MCU with 2k program EPROM, 128-byte data RAM, one 14-bit ADC, 8-bit GIO, and 4 12 LCD driver. With a few external passive components such as resistors and capacitors, the FS98O01 can be easily implemented to form a simple portable tire gauge, voltage panel meter, or manual range DMM, etc. Especially, FS98O01s EPROM could be written by program instruction, so users can write table or calibration data in the unused EPROM address more than one time.

FS9168-017 is the standard code IC of FS9168 series for wide range thermal measurement. It can provide a low cost and low power consumption thermometer solution easily with 104GT thermistor and a few external components.

Advanced Power MOSFETs utilized advanced processing techniques to achieve low on-resistance, extremely efficient and cost-effective device best suited for lithium-ion Battery charging and discharging switch . The DFN-8 package is universally used for all commercial-industrial applications.

Advanced Power MOSFETs utilized advanced processing techniques to achieve low on-resistance, extremely efficient and cost-effective device best suited for lithium-ion Battery charging and discharging switch. The SOT23-6 package is universally used for all commercial-industrial applications.

Advanced Power MOSFETs utilized advanced processing techniques to achieve low on-resistance, extremely efficient and cost-effective device best suited for lithium-ion Battery charging and discharging switch . The TSSOP-8 package is universally used for all commercial-industrial applications

The FS3332 Series are protection ICs for 2-serial-cell lithium-ion/lithium-polymer rechargeable batteries and include high-accuracy voltage detectors and delay circuits. These ICs are suitable for protecting 2-cell rechargeable lithium-ion/lithium-polymer battery packs from overcharge, overdischarge, and over-current.