Results forMAX258

The MAX2580 is a highly integrated, multistandard transceiver for 4G (LTE) small-cell basestations. The transceiver is capable of operating in both TDD and FDD modes in all LTE bands. It incorporates two fully integrated and independent transmit and receive paths, enabling full support of MIMO operation. Each receive path includes multiple input ports to support monitoring of out of band channels. The transceiver includes all components of the RF front-end as well as baseband amplifiers, data converters and channel selection filters. The MAX2580 requires only a few external components to work as an all-band, multimode, MIMO transceiver with programmable RX and TX channel bandwidths to support all LTE configurations. IQ mismatch of both RX and TX paths is factory calibrated to meet the EVM requirement for 64QAM modulation in select bands. In addition, the TX path does not require an external SAW filter to meet emission and desensitization specifications in some applications. All decimation/interpolation and channel selection filters are included on chip. For data transmission to the BBIC, the transceiver includes a JESD207-compliant parallel interface. The device is controlled via a standard SPI interface. Applications LTE Femtocell and Picocell Basestations

The MAX2582 highly integrated RF-to-baseband receiver supports PCS-band applications such as CDMA and OFDM. The MAX2582 includes an LNA, mixer, baseband filter, PLL, VGA, and an RF voltage-controlled oscillator (VCO). The entire receiver eliminates most of the external components found in other receivers including the IF-SAW filter and VCO. To optimize dynamic range at minimum current, the MAX2582 implements several programmable gain and linearity states, each optimized for minimum current while meeting sensitivity and linearity requirements for as many as four ranges of received signal strength. The MAX2582 is available in a 7mm x 7mm leadless 48-pin fcLGA package and is specified over the extended -40°C to +85°C temperature range. Applications IS-2000 1xEV, EV-DO, and EV-DV IS-95 (CDMA) OFDM

The MAX2585 highly integrated RF-to-baseband receiver addresses multiband, multimode applications by providing switched signal paths for cellular AMPS, cellular CDMA, and PCS CDMA. The MAX2585 includes an LNA, mixer, baseband filter, PLL, VGA, and AMPS-grade RF VCO. The entire receiver eliminates most of the external components found in other receivers including the IF-SAW filters and multiband VCOs. To optimize dynamic range at minimum current, the MAX2585 implements several programmable gain and linearity states, each optimized for minimum current while meeting sensitivity and linearity requirements for as many as four ranges of received signal strength. The MAX2585 is available in a 7mm x 7mm, leadless 48-fcLGA package and is specified over the -40°C to +85°C temperature range. Applications AMPS, IS95, OFDM Dual-Band, Multimode PCS/Cellular Mobile Devices IS-2000 1xEV, EV-DO, and EV-DV

The MAX2584A highly integrated RF-to-baseband receiver supports cellular-band applications such as CDMA and OFDM. The MAX2584A includes an LNA, mixer, baseband filter, PLL, VGA, and an RF VCO. The entire receiver eliminates most of the external components found in other receivers including the IF SAW filter and VCO. To optimize dynamic range at minimum current, the MAX2584A implements several programmable gain and linearity states, each optimized for minimum current while meeting sensitivity and linearity requirements for as many as four ranges of received signal strength. The MAX2584A is available in a 7mm x 7mm leadless 48-pin flip-chip (fcLGA) package and is specified over the extended -40°C to +85°C temperature range. Applications IS-2000 1xEV, EV-DO, and EV-DV IS-95 (CDMA) OFDM Systems

MAX2582 RF RECEIVER

MAX2585 RF RECEIVER

IC RF TXRX CELLULAR

MAX2584 RF RECEIVER

MAX2584 RF RECEIVER

IC PWR DRIVER N-CHAN 1:2 8TDFN

EVAL KIT FOR MAX258

MAX2582 RF RECEIVER