Results forTXS0102

VOLTAGE LEVEL TRANSLATOR 2-BIT BIDIR 1.65V-5.5V 8-SSOP

IC TRANSLATOR BIDIRECTIONAL SM8

IC TRANSLTR BIDIRECTIONAL 8VSSOP

IC TRANSLTR BIDIRECTIONAL 8VSSOP

IC TRANSLTR BIDIRECTIONAL 8X2SON

IC TRANSLTR BIDIRECTIONAL 8DSBGA

IC TRANSLTR BIDIRECTIONAL 8DSBGA

IC TRANSLATOR BIDIRECTIONAL SM8

IC TRANSLATOR BIDIRECTIONAL SM8

IC TRANSLTR BIDIRECTIONAL 8VSSOP

IC TRANSLTR BIDIRECTIONAL 8VSSOP

This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65V to 3.6V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3V to 5.5V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8V, 2.5V, 3.3V, and 5V voltage nodes. When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption. To put the device in the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the current-sourcing capability of the driver determines the minimum value of the resistor.

IC TRANSLATOR BIDIRECTIONAL SM8

这款转换器/电平移位器支持双向通道，适用于多种应用场景中的信号转换。它能够处理高达24Mbps的数据速率，确保快速有效的数据传输。工作电压范围灵活，一侧为1.65V至3.6V (VCCA)，另一侧支持2.3V到5.5V (VCCB)，适应不同系统间的电压需求。该器件在设计上注重效率与兼容性，使它能够在广泛的电子项目中实现稳定的电平转换。无论是低功耗设备还是高性能计算平台，此转换器都能提供可靠的支持，促进不同电压逻辑电路间的无缝通信。

IC TRANSLTR BIDIRECTIONAL 8X2SON

TXS0102DTTR

This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65V to 3.6V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3V to 5.5V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8V, 2.5V, 3.3V, and 5V voltage nodes. When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption. To put the device in the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the current-sourcing capability of the driver determines the minimum value of the resistor.