Поиск аналогов электронных компонентов
40056
Pepperl+Fuchs, Inc.Германия

40056

Производится

Temperature head transmitter

Подобрать аналогСпросить AI FAE

Все аналоги

Полный отчёт

Технические параметры

Питание
Currentresistance thermometer (RTD): sensor current ≤ 0.6 mA thermocouple (TC): sensor current 30 mA
Current limit≤ 25 mA
Rated voltageU r | 8 ... 35 V DC 8 ... 30 V DC for hazardous area
Self current consumptionmax. 3.5 mA
Характеристики по постоянному и переменному току
Residual rippleU pp ≤ 5 V at U b ≥ 13 V, f max = 1 kHz
Switch-on delayt on | 4 s , during power up I a = 3.8 mA
Условия эксплуатации и корпус
Ambient temperature-40 ... 85 °C (-40 ... 185 °F) , for hazardous area see certificate
Dimensions∅44 x 22,5 mm (1.7 x 0.9 inch)
Storage temperature-40 ... 100 °C (-40 ... 212 °F)
Другое
Climate classEN 60654, class C
Cold junction compensationinternal (Pt100) or external (0 ... 80 °C (273 ... 353 K)), accuracy ± 1 K
Configurationvia PC operating software, configuration set TXU 10L interface: PC interface connection cable TTL-/-RS 232 with plug
Connectionterminals 1, 2
Construction typeconnection head acc. to DIN 43729 form B, field housing
Degree of protectionIP00/IP66 installed
Directive 2004/108/EC (EMC)emitted interference and noise immunity to EN 61326-1:2006 and EN 61326-2-3:2006
Directive 94/9/EC (ATEX)EN 60079-0:2006, EN 60079-11:2007, EN 60079-26:2007
Electromagnetic compatibilityNE 21
Electromagnetic compatibility NE 21 Degree of protection EN 60529 Climate class EN 60654, class C Vibration resistance EN 60068-2-6Electromagnetic compatibility | NE 21 | Degree of protection | EN 60529 | Climate class | EN 60654, class C | Vibration resistance | EN 60068-2-6
Explosion-hazardous areaZELM 07 ATEX 0352 X , for additional certificates see www.pepperl-fuchs.com
Input/Outputsafe galvanic isolation acc. to EN 50020, 3.75 kV AC
Lead resistanceresistance thermometer (RTD): max. 11 Ω per line
Load(V s - 8)/0.025 A
Massapprox. 40 g
Materialhousing: PC potting: PUR
Maximum measured errorresistance thermometer (RTD): 0.2 ... 0.5 K or 0.08 ... 0.2 % resistance transmitter (Ω): ± 0.1 ... 1.5 Ω or 0.08 ... 0.12 % thermocouple (TC): typ. 0.5 ... 2.0 K or 0.08 % voltage transmitter: ± 20 µV or 0.08 %
Output signal4 ... 20 mA, 20 ... 4 mA temperature linear, resistance linear, voltage linear
Reference operating conditionscalibration temperature 23 °C (296 K) ± 5 K
Relative humiditymoisture condensation allowable
Response time1 s
Sensor typesresistance thermometer (RTD): - Pt100, Pt500, Pt1000 acc. to IEC 751 and Ni100, Ni500, Ni1000 acc. to DIN 43760 resistance transmitter (Ω) thermocouple (TC): - B (PtRh30-PtRh6), C (W5Re-W26Re), D (W3Re-W25Re), E (NiCr-CuNi), J (Fe-CuNi), K (NiCr-Ni), L (Fe-CuNi), N (NiCrSi-NiSi), R (PtRh13-Pt), S (PtRh10-Pt), T (Cu-CuNi), U (Cu-CuNi), MoRe5-MoRe41 acc. to IEC 584, part 1 voltage transmitter (mV)
Signal on alarmmeasuring range undercut: linear drop to 3.8 mA exceeding measuring range: linear rise to 20.5 mA sensor breakage, sensor short circuit: ≤ 3.6 mA oder ≥ 21.0 mA can be set up
Supplementary documentationtechnical information TI070O operating instructions KA141O safety information SI085O (ZELM 07 ATEX 0352 X)
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
Type of protectionII 1G Ex ia IIC T6/T5/T4
Vibration resistance4 g/2 ... 150 Hz

Изображения

Документы

К этому компоненту пока не привязаны документы.