RF Amplifiers

IC RF AMP GAAS PHEMT MMIC 2.3-2.7GHZ 16-QFN

IC RF AMP 1CH 15.5DB 4-MICRO-X

BR9924DAJ是一款MMIC单片放大器，该产品能覆盖30MHz～2GHz的频率范围，内部集成低噪声放大器和射频开关，可实现放大器和开关之间的相互转换，已经内匹配到50欧姆，该产品采用+3.3V电源供电，具有低功耗、低噪声、高增益平坦度等特点。

BR9925DAJ是一款集成Bypass旁路的低噪声放大器，该产品覆盖200MHz~4GHz频率范围。已经内匹配到50欧姆，射频输入输出端口需要外加直电容，片上有源偏置网络保证静态电流不受阈值电压和温度的影响。该产品在宽频带范围内具有高线性、低噪声等特点，可广泛应用于高性能收发链路系统中。

BR9926DAJ是一款集成Bypass旁路的低噪声放大器，该产品覆盖4Hz~6GHz频率范围，已经内匹配到50欧姆，射频输入输出端口需要外加隔直电容，片上有源偏置网络保证静态电流不受阈值电压和温度的影响。该产品在宽频带范围内具有低功耗、高平坦度等特点，可广泛应用于高性能收发链路系统中。

GainBlock 放大器

Qorvo's SGA4263Z is a high performance SiGe HBT MMIC Amplifier. A Darlington configuration featuring one-micron emitters provides high FT and excellent thermal performance. The heterojunction increases breakdown voltage and minimizes leakage current between junctions. Cancellation of emitter junction non-linearities results in higher suppression of intermodulation products. Only two DC-blocking capacitors, a bias resistor, and an optional RF choke are required for operation. Product Categories Products> Amplifiers> Gain Block Amplifiers Application Categories Applications> Network Infrastructure> Point-to-Point Radio Applications> Network Infrastructure> Wireless Infrastructure> Base Stations Applications> Network Infrastructure> Wireless Infrastructure> Repeaters / Boosters / DAS

Qorvo's QPA2811 is a packaged, high-power X-band amplifier fabricated on Qorvo’s production 0.15 um GaN on SiC process (QGaN15). Covering 8.5 - 10.55 GHz, the QPA2811 provides 48.9 dBm of saturated output power and 27.9 dB of large-signal gain while achieving 48.5 % power-added efficiency. The QPA2811 is packaged in a 7 mm x 7 mm 48-pin plastic overmolded package. It can support a variety of operating conditions to best support system requirements. With good thermal properties, it can support a range of bias voltages. The QPA2811 MMIC RF ports are DC grounded and matched to 50 ohms. The QPA2811 is ideal for military radar systems. Lead-free and RoHS compliant. Typical Applications Radar Product Categories Products> Amplifiers> High Frequency Amplifiers (> 6 GHz) Products> Amplifiers> Power Amplifiers (> 3 W) Application Categories Applications> Defense & Aerospace> Electronic Warfare Applications> Defense & Aerospace> Radar

Qorvo's QPA1111 is a high power, packaged X-Band MMIC amplifier fabricated using Qorvo's production 0.15 um GaN-on-SiC process (QGaN15). The QPA1111 operates from 8.5 – 10.5 GHz, typically provides 30 W saturated output power with power-added efficiency of 45% and small signal gain of 38 dB. To simplify system integration, the QPA1111 is fully matched to 50 ohms with DC grounded I/O ports for optimum ESD performance. Also, there are on-chip blocking capacitors following the DC grounds on the input and output ports. The QPA1111 is ideal for supporting communications and radar applications in both commercial and military markets. The QPA1111 is 100% DC and RF tested to ensure compliance to electrical specifications. Lead-free and RoHS compliant. Product Categories Products> Amplifiers> High Frequency Amplifiers (> 6 GHz) Products> Amplifiers> Power Amplifiers (> 3 W) Application Categories Applications> Defense & Aerospace> Radar Applications> Network Infrastructure> Satellite Communications

IC AMP HSDPA 1.805-1.88GHZ 14SMD

IC AMP VSAT DBS 27GHZ-33GHZ DIE

AMPLIFIER,CASCADABLE,THIN FILM

AMPLIFIER,SURFACE MOUNT

AMPLIFIER,ECONOMY,SCREENED

AMPLIFIER,SURFACE MOUNT,CASCADAB

AMPLIFIER,ECONOMY

AMPLIFIER 10-500 MHZ T0-8 A83

IC AMP VSAT DBS 2GHZ-18GHZ MODUL

IC RF AMP GP 1.5GHZ-3GHZ SOT89-3

IC AMP HSDPA 860MHZ-894MHZ MODUL