Pepperl+Fuchs, Inc.Германия
131195
ПроизводитсяAdapter cable SMA plug straight to TNC plug straight, FRNC coaxial cable black, UV resistant
Все аналоги
Полный отчётТехнические параметры
| Характеристики по постоянному и переменному току | |
|---|---|
| Impedance | 50 Ω ± 2 Ω |
| Условия эксплуатации и корпус | |
| Operating temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Другое | |
| Bending radius | ≥ 44 mm , movable installation ≥ 22 mm , fixed installation |
| Body | Zinc diecast, nickel-plated |
| Conductor construction | inner conductor copper, stranded wire ∅ 1.44 mm outer conductor aluminium foil tinned copper braiding ∅ 4.2 mm |
| Construction type | SMA connector 1/4-36 UNS-2B |
| Construction type SMA connector 1/4-36 UNS-2B Style straight Locking screw connection | Construction type | SMA connector 1/4-36 UNS-2B | Style | straight | Locking | screw connection |
| Construction type TNC connector 7/16-28 UNEF Style straight Locking screw connection | Construction type | TNC connector 7/16-28 UNEF | Style | straight | Locking | screw connection |
| Contact surface | gold plated (Au) |
| Core construction | coaxial |
| Core insulation | PE |
| Flammability | IEC 60332-1-2 |
| Length | L | 6 m |
| Locking | screw connection |
| Mass | 290.5 g |
| Mating cycles | min. 500 |
| Plug connection | SMA connector : IEC 60169-15 TNC connector : IEC 60169-17 |
| Screw connection | Zinc diecast, nickel-plated |
| Screw connection Zinc diecast, nickel-plated Body Zinc diecast, nickel-plated Seal silicone Contact surface gold plated (Au) | Screw connection | Zinc diecast, nickel-plated | Body | Zinc diecast, nickel-plated | Seal | silicone | Contact surface | gold plated (Au) |
| Seal | silicone |
| Sheath color | black (similar to RAL 7021) |
| Sheath diameter | 5.5 mm |
| Sheathing | FRNC |
| Sheathing FRNC Core insulation PE UV resistance yes Flammability flame retardant | Sheathing | FRNC | Core insulation | PE | UV resistance | yes | Flammability | flame retardant |
| Signal attenuation | 29.1 dB/100 m @ 900 MHz |
| Style | straight |
| Tightening torque | 0.79 ... 1.13 Nm |
| Tightening torque 0.46 ... 0.69 Nm Tool installation straight knurling Mating cycles min. 500 | Tightening torque | 0.46 ... 0.69 Nm | Tool installation | straight knurling | Mating cycles | min. 500 |
| Tightening torque 0.79 ... 1.13 Nm Tool installation hexagon nut SW = 8 mm Mating cycles min. 500 | Tightening torque | 0.79 ... 1.13 Nm | Tool installation | hexagon nut SW = 8 mm | Mating cycles | min. 500 |
| Tool installation | hexagon nut SW = 8 mm |
| UV resistance | yes |
Изображения
Документы
К этому компоненту пока не привязаны документы.