Поиск аналогов электронных компонентов
13708
Pepperl+Fuchs, Inc.Германия

13708

Производится

Conductive Switch Amplifier

Спросить AI FAE

Все аналоги

Полный отчёт

Технические параметры

Питание
Input/power supplyreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V eff
Open circuit voltage/short-circuit currentapprox. 10 V AC (approx. 1 Hz) / approx. 5 mA
Output/power supplyreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V eff
Power consumptionapprox. 0.8 W
Rated voltageU r | 207 ... 253 V AC, 45 ... 65 Hz
Характеристики по постоянному и переменному току
Energized/De-energized delayapprox. 1 s / approx. 1 s
Условия эксплуатации и корпус
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Dimensions20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1
Height107 mm
Height 107 mm Width 20 mm Depth 115 mmHeight | 107 mm | Width | 20 mm | Depth | 115 mm
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Другое
Configurationvia DIP switches : switch S1 Position I open circuit current: In the open circuit current principle, the relay becomes active when the limit is reached. Position II closed circuit current: In closed circuit current principle, the relay is activated when power is applied. The relay is deactivated when the limit is reached. via potentiometer
Connectionterminals 11 (L1), 12 (N)
Connection sidefield side
Contact loading253 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load
Control elementsDIP switch potentiometer
Control inputmin./max. control system: terminals 1, 2, 3 on/off control system: terminals 1, 3
Degree of protectionIEC 60529:2001
Depth115 mm
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)Directive 2014/30/EU | EN 61326-1:2013 (industrial locations)
Directive 2014/35/EUEN 61010-1:2010
Directive 2014/35/EU EN 61010-1:2010Directive 2014/35/EU | EN 61010-1:2010
Display elementsLEDs
Electromagnetic compatibilityNE 21:2006
Galvanic isolationEN 50178:1997
Input/Outputreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V eff
Insulation coordinationEN 50178:1997
Labelingspace for labeling at the front
Massapprox. 110 g
Output1 changeover contact
Response sensitivity1 ... 30 kΩ , adjustable via potentiometer (20 turns)
Signal typeDigital Input
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Width20 mm

Изображения

Документы

К этому компоненту пока не привязаны документы.