Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| Off-state current | I r | 0.4 ... 1 mA typ. 0.6 mA |
| Operating current | I L | 2 ... 200 mA |
| Operating voltage | U B | 10 ... 60 V |
| Voltage drop | U d | ≤ 6 V |
| Характеристики по постоянному и переменному току | |
| Switching frequency | f | 0 ... 80 Hz |
| Time delay before availability | t v | ≤ 300 ms |
| Условия эксплуатации и корпус | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Height | 40 mm |
| Height 40 mm Width 80 mm Length 80 mm | Height | 40 mm | Width | 80 mm | Length | 80 mm |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Другое | |
| Actual operating distance | s r | 45 ... 55 mm typ. |
| Assured operating distance | s a | 0 ... 40.5 mm |
| CCC approval | Certified by China Compulsory Certification (CCC) |
| Connection type | screw terminals |
| Core cross section | up to 2.5 mm 2 |
| Degree of protection | IP67 |
| Housing material | PBT |
| Hysteresis | H | 0 ... 20 % typ. 5 % |
| Installation | non-flush |
| Length | 80 mm |
| Output polarity | DC |
| Output type | Two-wire |
| Rated operating distance | s n | 50 mm |
| Reduction factor r 304 | 0.8 |
| Reduction factor r Al | 0.4 |
| Reduction factor r Cu | 0.35 |
| Reverse polarity protection | reverse polarity tolerant |
| Sensing face | PBT |
| Short-circuit protection | pulsing |
| Standards | EN IEC 60947-5-2 |
| Standards EN IEC 60947-5-2 | Standards | EN IEC 60947-5-2 |
| Switching function | Normally open/closed (NO/NC) |
| Switching state indicator | LED, yellow |
| Tightening torque, housing screws | 1 Nm |
| UL approval | cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 60 V DC Output Switching Current: 200 mA |
| Width | 80 mm |
Изображения
Документы
К этому компоненту пока не привязаны документы.