37340

Производится

Background suppression sensor

Все аналоги

Технические параметры

Питание
No-load supply current	I 0 \| ≤ 40 mA
Operating voltage	U B \| 10 ... 30 V DC , class 2
Switching current	max. 100 mA
Switching voltage	max. 30 V DC
Характеристики по постоянному и переменному току
Ripple	10 %
Switching frequency	f \| 125 Hz
Условия эксплуатации и корпус
Ambient temperature	-25 ... 60 °C (-13 ... 140 °F)
Height	88 mm
Height 88 mm Width 25.8 mm Depth 54.3 mm	Height \| 88 mm \| Width \| 25.8 mm \| Depth \| 54.3 mm
Storage temperature	-40 ... 75 °C (-40 ... 167 °F)
Другое
Ambient light limit	50000 Lux
Background suppression	max. + 10 % of the upper limit of the detection range
Black-white difference (6 %/90 %)	< 35 % at 1200 mm sensor range
Connection	with 0.2 m fixed cable and 4-pin, M12 connector
Control elements	Sensing range adjuster
Degree of protection	IP65
Depth	54.3 mm
Detection range	30 ... 1200 mm , adjustable
Detection range max.	30 ... 1200 mm
Detection range min.	20 ... 200 mm
Diagnostic Coverage (DC)	0 %
Diameter of the light spot	approx. 25 mm at a distance of 1200 mm
Function indicator	LED yellow: switching state
Housing	Plastic ABS
Housing Plastic ABS Optical face plastic	Housing \| Plastic ABS \| Optical face \| plastic
Light source	LED 660 nm
Light type	modulated visible red light
Mass	90 g
Mission Time (T M )	20 a
MTTF d	720 a
Opening angle	Emitter: 1.2 ° , Receiver: 2 °
Optical face	plastic
Product standard	EN 60947-5-2
Protection class	II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
Response time	4 ms
Signal output	2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected
Switching type	light-on
UL approval	E87056 , cULus Listed , class 2 power supply , type rating 1
Width	25.8 mm

Изображения

Фото · Каталог ChipCross

Документы

К этому компоненту пока не привязаны документы.