Pepperl+Fuchs, Inc.Германия
3752
ПроизводитсяPresence detector using infrared heat radiation for detecting people, detection range 1.8 m x 2.6 m, max. installation height 5 m, black housing, relay contact output, screw terminals
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| No-load supply current | I 0 | approx. 15 mA |
| Operating voltage | U B | 12 ... 24 V AC / 12 ... 30 V DC |
| Power consumption | P 0 | approx. 350 mW at 24 V |
| Switching current | 1 A |
| Switching power | max. 30 W / 60 VA |
| Switching voltage | 48 V AC/DC |
| Характеристики по постоянному и переменному току | |
| De-energized delay | t off | 0.5 s (preset) |
| Условия эксплуатации и корпус | |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Height | 23 mm |
| Height 23 mm Width 56 mm Depth 45 mm | Height | 23 mm | Width | 56 mm | Depth | 45 mm |
| Mounting height | recommended: max. 3.5 m |
| Другое | |
| CE conformity | yes |
| Connection | screw terminals, removable |
| Control elements | Zoom screw for adjusting the detection field , sensitivity adjustment , changeover switch, active/passive |
| Degree of protection | IP52 |
| Depth | 45 mm |
| Detection field | max. 1800 mm x 2600 mm for a mounting height of 2500 mm |
| Effective detection range | max. 12 m (frontal) |
| Function indicator | LED red: illuminates upon detection |
| Housing | black ABS |
| Housing black ABS Optical face plastic lens | Housing | black ABS | Optical face | plastic lens |
| Mass | approx. 40 g |
| MTTF d | Relay load 12 V/10 mA: 500 a * Relay load 24 V/10 mA: 350 a * Relay load 6 V/100 mA: 100 a * Relay load 30 V/1 A: 0.1 a * * For 200,000 switching cycles/year in each case |
| Operation indicator | LED green |
| Optical face | plastic lens |
| Signal output | Relay, 1 alternator |
| Standards | 89/336 EWG |
| Standards 89/336 EWG | Standards | 89/336 EWG |
| Switching type | Output active/passive, programmable |
| Width | 56 mm |
Изображения
Документы
К этому компоненту пока не привязаны документы.