Pepperl+Fuchs, Inc.Германия
40864
ПроизводитсяRetroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, sensitivity adjuster, light/dark on, DC version, NPN output, fixed cable
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| No-load supply current | I 0 | < 20 mA |
| Operating voltage | U B | 10 ... 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Switching voltage | max. 30 V DC |
| Voltage drop | U d | ≤ 1.5 V DC |
| Характеристики по постоянному и переменному току | |
| Ripple | max. 10 % |
| Switching frequency | f | 1000 Hz |
| Условия эксплуатации и корпус | |
| Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) |
| Height | 31 mm |
| Height 31 mm Width 11 mm Depth 20 mm | Height | 31 mm | Width | 11 mm | Depth | 20 mm |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Другое | |
| Ambient light limit | EN 60947-5-2:2007+A1:2012 |
| Cable length | 2 m |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection | 2 m fixed cable |
| Control elements | sensitivity adjustment |
| Degree of protection | IP67 |
| Depth | 20 mm |
| Diagnostic Coverage (DC) | 0 % |
| Diameter of the light spot | approx. 500 mm at a distance of 7 m |
| Effective detection range | 0 ... 5 m |
| Function indicator | LED yellow: lights up when receiving the light beam ; flashes when falling short of the operating reserve; OFF when light beam is interrupted |
| Housing | PC (Polycarbonate) |
| Housing PC (Polycarbonate) Optical face PMMA | Housing | PC (Polycarbonate) | Optical face | PMMA |
| Light source | LED |
| Light type | modulated visible red light |
| Mass | approx. 50 g |
| Mission Time (T M ) | 20 a |
| MTTF d | 860 a |
| Opening angle | approx. 4 ° |
| Operation indicator | LED green: power on |
| Optical face | frontal |
| Polarization filter | yes |
| Product standard | EN 60947-5-2 |
| Reference target | H50 reflector |
| Reflector distance | 0.02 ... 5 m |
| Response time | 0.5 ms |
| Signal output | 1 NPN output, short-circuit protected, reverse polarity protected, open collector |
| Switching type | The switching type of the sensor is adjustable. The default setting is: light-on |
| Threshold detection range | 7 m |
| Tightening torque, fastening screws | 0.6 Nm |
| UL approval | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure |
| Width | 11 mm |
Изображения
Документы
К этому компоненту пока не привязаны документы.