Поиск аналогов электронных компонентов
41091
Pepperl+Fuchs, Inc.Германия

41091

Производится

Termination Board

Спросить AI FAE

Все аналоги

Полный отчёт

Технические параметры

Питание
Field circuit/control circuit safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 VField circuit/control circuit | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Maximum safe voltage250 V (Attention! U m is no rated voltage.)
Maximum safe voltage 250 V (Attention! U m is no rated voltage.)Maximum safe voltage | 250 V (Attention! U m is no rated voltage.)
Nominal voltage24 V DC , in consideration of rated voltage of used isolators
Power dissipation≤ 500 mW , without modules
SupplyRedundancy available. The supply for the isolators is decoupled, monitored and fused.
Voltage drop0.9 V , voltage drop across the series diode on the termination board must be considered
Характеристики по постоянному и переменному току
Ripple≤ 10 %
Условия эксплуатации и корпус
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Dimensions273 x 155 x 153 mm (10.7 x 6.1 x 6.0 inch) (W x H x D) , depth including module assembly
Height155 mm
Height 155 mm Width 273 mm Depth 153 mmHeight | 155 mm | Width | 273 mm | Depth | 153 mm
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Другое
ConnectionTB3: terminals 2, 4(+); 1, 3(-)
Contact loading30 V DC , 1 A
Control drawing116-0327
Control drawing 116-0327Control drawing | 116-0327
Control sidenon-explosion hazardous area: 37-pin Sub-D connector
Core cross sectionscrew terminals: 0.25 ... 2.5 mm 2 (24 ... 12 AWG)
Degree of protectionIEC 60529:2001
Depth153 mm
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)Directive 2014/30/EU | EN 61326-1:2013 (industrial locations)
Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 50303:2000
Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 50303:2000Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 50303:2000
Display elementsLED Supply1 (power supply termination board), green LED LED Supply2 (power supply termination board), green LED LED Fault Status (fault indication), green LED - LED lits: no module fault/no power supply fault
Electromagnetic compatibilityNE 21:2017 For further information see system description.
EU-type examination certificateCESI 06 ATEX 022
Fault outputpluggable screw terminals , black
Field circuit/control circuitsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Field sideexplosion hazardous area: pluggable screw terminals , blue
Fusing4 A , in each case for 16 modules
IECEx certificateIECEx CES 06.0003
IECEx certificate IECEx CES 06.0003 IECEx marking [Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] IIECEx certificate | IECEx CES 06.0003 | IECEx marking | [Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I
IECEx marking[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I
MarkingII (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Marking II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] IMarking | II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Massapprox. 845 g
Materialhousing: polycarbonate
Output typevolt-free contact
Reverse polarity protectionyes
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Switch behaviourno fault: relay contact closed power supply fault: relay contact open module fault: relay contact open
UL approvalE106378
Width273 mm

Изображения

Документы

К этому компоненту пока не привязаны документы.