Поиск аналогов электронных компонентов
83629
Pepperl+Fuchs, Inc.Германия

83629

Производится

Miniature photoelectric sensor with plug-in style housing for mounting in 13 mm hole

Подобрать аналогСпросить AI FAE

Все аналоги

Полный отчёт

Технические параметры

Питание
No-load supply currentI 0 | Emitter: ≤ 20 mA Receiver: ≤ 10 mA
Operating voltageU B | 10 ... 30 V DC
Switching currentmax. 100 mA
Switching voltagemax. 30 V DC
Voltage dropU d | ≤ 1.5 V DC
Характеристики по постоянному и переменному току
Switching frequencyf | 100 Hz
Условия эксплуатации и корпус
Ambient temperature-40 ... 60 °C (-40 ... 140 °F) , fixed installation -20 ... 60 °C (-4 ... 140 °F) , movable
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Другое
Ambient light limithalogen light 100000 Lux ; according to EN 60947-5-2:2007
CCC approvalCCC approval / marking not required for products rated ≤36 V
Connection160 mm fixed cable in M8 plug Receiver: Connection line, gray ; Emitter: Connection line, black
Degree of protectionIP67
Diagnostic Coverage (DC)0 %
Diameter12.5 mm
Diameter of the light spotapprox. 250 mm at a distance of 2 m
Effective detection range0 ... 2 m
EmitterBB10-T-7650/115c
Function indicatorLED red: lights up when receiving the light beam ; flashes when falling short of the operating reserve; OFF when light beam is interrupted
HousingPC , black
Housing PC , black Optical face Plastic paneHousing | PC , black | Optical face | Plastic pane
Length22 mm
Length 22 mm Diameter 12.5 mmLength | 22 mm | Diameter | 12.5 mm
Light sourceIRED
Light typemodulated infrared light , 880 nm
Massapprox. 15 g per device
Mission Time (T M )20 a
MTTF d795 a
Opening angleEmitter: +/- 3 ° Receiver: +/- 10 ° at max. sensing range ; typical
Optical facefrontal
Product standardEN 60947-5-2
ReceiverBB10-R-F1/35/59/103/115c
Relative humidity90 % , non-condensing
Response time5 ms
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching typedark-on
Threshold detection rangemin. 2,5 m, max. 4,2 m The range limit is based on the sensor switch point.

Изображения

Документы

К этому компоненту пока не привязаны документы.