Pepperl+Fuchs, Inc.Германия
95012
ПроизводитсяMale connector M12 angled L-coded 5-pin, for cable diameter 8 - 13 mm, field-attachable
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| Overvoltage category | III |
| Rated operating current | I e | 1.5 mm², AWG 16 : 12 A 2.5 mm², AWG 14 : 16 A |
| Rated operating voltage | U e | max. 48 V AC / 63 V DC |
| Условия эксплуатации и корпус | |
| Ambient temperature | -40 ... 105 °C (-40 ... 221 °F) |
| Другое | |
| Body | PA, black |
| Coding | L-coded |
| Connection | plug |
| Connection plug Construction type M12 Style angled Locking screw connection Number of pins 5 Coding L-coded Customization Coding rotateable in steps of 72° | Connection | plug | Construction type | M12 | Style | angled | Locking | screw connection | Number of pins | 5 | Coding | L-coded | Customization | Coding rotateable in steps of 72° |
| Construction type | M12 |
| Contact surface | gold plated (Au) |
| Core cross section | 2.5 mm 2 / 14 AWG max. |
| Customization | Coding rotateable in steps of 72° |
| Degree of protection | EN 60529 |
| Flammability | V-0 |
| Installation | screw terminals 0.4 Nm |
| Insulation resistance | min. 10000 MΩ |
| Locking | screw connection |
| Mass | 48 g |
| Mating cycles | min. 100 |
| Number of pins | 5 |
| Plug connection | connector M12 x 1 : IEC 61076-2-101 |
| Pollution degree | 3 |
| Screw connection | CuZn, nickel-plated |
| Screw connection CuZn, nickel-plated Body PA, black Contact surface gold plated (Au) Flammability V-0 | Screw connection | CuZn, nickel-plated | Body | PA, black | Contact surface | gold plated (Au) | Flammability | V-0 |
| Sheath diameter | 8 ... 13 mm |
| Sheath diameter 8 ... 13 mm Core cross section 2.5 mm 2 / 14 AWG max. | Sheath diameter | 8 ... 13 mm | Core cross section | 2.5 mm 2 / 14 AWG max. |
| Style | angled |
| Surge protection | Category III |
| Tightening torque | 0.6 Nm |
| Tightening torque 0.6 Nm Tool installation straight knurling , hexagon nut SW = 22 mm Mating cycles min. 100 | Tightening torque | 0.6 Nm | Tool installation | straight knurling , hexagon nut SW = 22 mm | Mating cycles | min. 100 |
| Tool installation | straight knurling , hexagon nut SW = 22 mm |
| UL File Number | E363587 |
Изображения
Документы
К этому компоненту пока не привязаны документы.