The LP4034 is astandalone 1-cell switching battery charger providing up to 3.5A charge current to the battery from 4.1V to 6.2V input voltage. The charge current is programmable by a resistor connected from ISET to GND and the charge voltage is programmable by a resistor connected from VSET to GND. The charge can be enabled and disabled from lSET pin. The LP4034 operates at 1.2MHz switching frequency allowing a small-size 1uH inductor for 3.5A fast charging. The patent-protected integrated current sensing technique eliminates external sensing resistor allowing very high charge efficiency, low BOM cost and small footprint. The precharge, fastcharge and termination current accuracy is competitive external-resistor-based current compared to sensing architecture. LP4034 is available in DFN3x3-10 package.
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| 工作电压(V) | 4.1-28 |
| 最大充电电流(mA) | 3500 |
| 电池电压(V) | 3.6/4.2/4.4/4.45 |
| Условия эксплуатации и корпус | |
| 温度检测 | Y |
| Другое | |
| PG | - |
| 产品特征/功能 | IEC62368, high efficiency, current sensorless, high standing input voltage, TREG, OTP, OCP, NTC |
| 使能控制 | - |
| 充满状态指示 | - |
| 充电状态指示 | Y |
| 充电类型 | Buck Charger |
| 电池节数 | 1 |
| 过压保护(V) | 6.4 |