LP4034
ПроизводитсяThe LP4034 is a standalone 1-cell swilching baltery charger providing up to 3.5A charge current lo the battery from 4.1v lo 6.2V input voltage. The charge current is programmable by a resistor connected from ISET to GND and the charge voltage is programmable by a resislor connected from VSET to GND. The charge can be enabled and disabled from ISET pin. The LP4034 operates at 1.2MHz switching frequency allowing a small-size 1uHinductor for 3.5A fast charging. The current patent-protectedinlegrated sensing technique eliminales exlemal sensing resislor allowing very high charge efficiency, low BOM cost and small footprint. The precharge, fasicharge and termination current accuracy is competitive compared external-resistor-bas ed curent sensing architecture. LP4034 is available in DFN3x3-10 package.
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| 工作电压(V) | 4.1~28 |
| 最大充电电流(mA) | 3500 |
| 电池电压(V) | 4.1/4.2/4.35/4.4 |
| Условия эксплуатации и корпус | |
| 温度检测 | Y |
| Другое | |
| 产品特征/功能 | Current sensorless, high integration, 1uH inductor, fast charging, high efficiency |
| 使能控制 | - |
| 充满状态指示 | Y |
| 充电状态指示 | Y |
| 电池节数 | 1 |
| 过压保护(V) | 6.4 |