Detailed information of RS11, RS11 offered by Thunder Components Ltd. .
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| Voltage Coefficient | ≦±0.035%/V | use 10% and 100% rated voltage or maximum voltage (the lower) to test resistance value |
| Wlith Standing Voltage | No flasheover or breakcown | Testing voltage 100v 1 minute |
| Условия эксплуатации и корпус | |
| Resistance Temperature Coefficient | (Resistance Range) | (Maximum Resistance Value Range) | Test Temperature |
| Temperature Cyfcle | R≦±2% No visible damage | -55/+85℃ For 5 cycles |
| Другое | |
| 110KΩ~1MΩ | ±15 | ±10 |
| 11KΩ~100KΩ | ±13 | ±7.5 |
| 1.1KΩ~10KΩ | ±10 | ±6.0 |
| ≧11MΩ | ±25 | ±20 |
| 1.1MΩ~10MΩ | ±20 | ±15 |
| ≦1KΩ | ±6.5 | ±5.0 |
| -55~+20°C | +20~°C +100°C | +20°C/-55°C/+20°C/+100°C/+20°C |
| 70°C(Load Life) | R≦±10% No visible damage Marks legible | Rated voltage or maximum voltage,1.5 hours on, 0.5 hours off, 70 centigrade temperature 1000 hours |
| Description | Performance Requirements | Test Method |
| Humidity | R≦±10% No visible damage | 40℃ 95%RH 240 hours |
| Resistance to Vibration | R≦±2% No visible damage | 3 direction 2 hours each |
| Short-time Over load | △R≦2.5%R | 2.5time rated voltage or maximum over lad voltage (the lower)5 seconds |
| Solder ability | At least 95% of the dipping surface must be covered by new solder, no flaws gather ed. | 2 mm from the body. 2 seconds |
| Solder-neat Resistance | △R≦±2%R Marks legible, no bisible damage | 4mm from the body.3 seconds |
| Terminal Strength | Pulled | △R≦±2%R No Visible damage | Φd 0.6mm:Load 10N 10s |
| Twisted | 360°in opposite direction |
| Winded | Φd 0.6mm:Load 10N 90° |