硅谷数模-Analogix

The SP7101 SlimPort USB-C to HDMI adapter connects SlimPort or DisplayPort™ Alternate Mode enabled 4K Ultra HD mobile devices to HDMI monitors or TVs, allowing 2160p resolution videos and pictures from your mobile device to be viewed on a large screen.

The SP2003 adapter connects SlimPort or Mobility DisplayPort™ (MyDP) enabled mobile devices to VGA monitors or projectors, allowing videos and pictures from your mobile device to be viewed in resolutions up to 1080p@ 60Hz.

The SP1202 adapter connects SlimPort or MyDP enabled mobile devices to TVs with an HDMI connection, or monitors and projectors with a VGA connection. Capable of Full HD resolutions, the SP1202 displays the content of your mobile device on the big screen for all to share.

The SP1004 adapter connects SlimPort or Mobility DisplayPort™ (MyDP) enabled mobile devices to HDMI monitors or TVs, allowing Full HD resolution videos and pictures from your mobile device to be viewed on a large screen.

The SP6001 SlimPort-4K HDMI adapter connects SlimPort or Mobility DisplayPort™ (MyDP) enabled 4K Ultra HD mobile devices to HDMI monitors or TVs, allowing 2160p resolution videos and pictures from your mobile device to be viewed on a large screen.

The SP8001 SlimPort NANO•CONSOLE™ connects SlimPort or Mobility DisplayPort™ (MyDP) enabled 4K Ultra HD mobile devices to HDMI monitors or TVs, allowing 2160p resolution videos and pictures from your mobile device to be viewed on a large screen. A Bluetooth-enabled NANO Remote allows users to navigate the content on a large screen remotely from the mobile device.

RD1011 is a bidirectional active USB Type-CTM (USB-C) cable, which includes two paddle cards, each with an ANX7451 device on it. The ANX7451 is a 4x4 re-timing mux capable of switching DisplayPort (DP) and USB3.2 Gen 2 10Gbps signals to support a single USB Type-CTM (USB-CTM) port. The RD1011 design can recover both the USB and DP signals with loss compensation of up to 23dB and 27dB respectively. The RD1011 includes two ANX7410 devices, which act as an on-board programmable MCU and eMarker chip. With ANX7410, ANX7451 can be initiated with optimal settings that enable the RD1011 design to cover 4-meter at 28AWG cable length. RD1011 can be used with any USB-C port on any of the display monitors, docking stations and VR HMDs.

Analogix offers its silicon-proven HDMI IP cores (digital plus analogix PHY) for integration into customer's system-on-chip products to reduce overall BOM costs while consuming less board space than discrete HDMI chip solutions. HDMI 1.4 transmitter IP core is ideal for DVD, Blu-Ray Disc players, set-top boxes, A/V receivers. The IP core provides full support for HDCP 1.3 encryption. It also contains the Built-In Self Test (BIST) function. Analogix HDMI 1.4 Transmitter IP core (digital plus analog PHY) contains an advanced audio interface and a flexible video interface. It supports all relevant formats for compressed and lossless audio by flexible S/PDIF, I2S and one bit audio interfaces. Its video interface provides Deep Color support up to 36 bits-per-pixel. Integrated color space conversion allows direct connection to all major DVD and set-top box MPEG decoders.

DisplayPort and HDMI Transmit technologies are highly complex mixed signal designs which require both high performance analog design (equalizer, PLL, DLL, CDR, etc.) and complicated logic design (HDCP engine, TMDS decoder, video and audio data processing, etc.). The Dual Mode DisplayPort Transmitter IP core is fully compliant with DisplayPort 1.1a and HDMI 1.3 with HDCP content protection specifications. The IP core provides all the signal requirements for the DisplayPort source device receptacle. In HDMI mode, the dual-mode transmitter IP core is fully compliant to the HDMI 1.3 standard. The device supports Deep Color up to 36 bits per pixel. HDMI mode also supports the use of external DisplayPort-to-HDMI level shifting plug adapter.

The DisplayPort Transmistter IP core is fully compliant with DisplayPort 1.1a with HDCP content protection specifications. The IP core provides all the signal requirements for the DisplayPort source device receptacle. For HDMI mode it requires the use of an external DisplayPort-to-HDMI converter. Analogix DisplayPort Transmitter IP core contain the 36-bit video data and clock are video inputs, the SPDIF and I2S inputs are taken as audio input, the video data capture & video BIST block is separated as video_capture and video_bist module.

ANX9833 is a DisplayPort to VGA adapter IC designed to connect a DisplayPort 1.2/1.1 source to a VGA display. With its on-chip MCU and memory, the ANX9833 does not require any external configuration or setup. It automatically directs DisplayPort output from adapters to VGA, effectively working with all types of legacy monitors, projectors, and TVs. ANX9833 provides Gbps bandwidth over two lanes to reach WUXGA (1920x1200) resolutions.

ANX9807 is an ultra low power DP/eDP transmitter designed for motherboards. Any portable mobile device with an embedded ANX9807 device would be able to connect to any DP/eDP receiver through a passive cable as defined by DP/eDp specification.

ANX9804 is a low power dual mode DVO/LVTTL to DisplayPort/HDMI™ transmitter product designed for motherboard. The proprietary circuit technique adopted by ANX9804 makes the power consumption extreme low. With its low power consumption, it can fit into very small form factor devices that fit into modern lifestyle. ANX9804, a first in its class product, can be used in conjunction with ANX9835 (DisplayPort to DisplayPort/HDMI replicator) and ANX9815 (DisplayPort receiver) to provide end-to-end interface connectivity.

The ANX7816 is an ultra-low power Ultra-HD (4096x2160p30) SlimPort transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7816 works in conjunction with any MyDP/DisplayPort™ receiver, such as the ANX7730, ANX7732, and more. The ANX7816 transforms the HDMI output of an application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, an appropriate MyDP to DisplayPort cable can connect to any DisplayPort receiver. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.

The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7814 works in conjunction with any MyDP/DisplayPort™ receiver, such as the ANX7730, ANX7732, and more. The ANX7814 transforms the HDMI output of an application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, an appropriate MyDP to DisplayPort cable can connect to any DisplayPort receiver. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.