Результаты поиска:32124

The modular stackable cable clamp MSMC is used for easy, quick and secure fastening of cables, pipes and other cylindrical components. The variable clamping range is up to 16 mm. The great advantage of this cable cleat is that it can be easily extended by stacking or baying. By using the CMC30 coupler, different clamping areas can be connected to each other. The MSMC offers a very high level of corrosion protection thanks to the choice of materials for the cable clamps and screws. The cable cleat consists of an upper and a lower part as well as hexagon head screws. A coupler is used to easily connect several cable clamps together horizontally. The longitudinal and transverse ridges of the support surface serve to absorb torsional and tensile forces. The central mounting point (slotted hole) offers a high degree of flexibility on many surfaces. For even greater stability and torsion resistance, two long screws can be used for fastening. This also ensures that the short-circuit strength values ​​specified for MSMC 30-46 and MSMC 44-55 (acc. to IEC 61914) are achieved. Test Report IEC 61914 VDE Test Report 313501-TL6-1 VDE Test Report 317845-TL6-1 (Operating temperature acc. to EN 61914: -15 C° to 85 C°) The cable cleats are available as Set A for lining up and stacking or as Set B for baying. Set B contains a cable clamp (upper and lower part), a coupler and two short hexagon head screws. Set A additionally contains two long hexagon head screws. The cable clamp can be combined with a sliding nut for optional assembly on the 30 mm C-rail. In combination with the practical elastic clamp pads, MSMC cable clamps offer expanded and optimised application possibilities. The inserts are very easy to install; they are placed directly onto the upper and lower parts of the MSMC. Please note: The use of the inserts changes the clamping range of the cable clamp! Mounting brackets MBR/MW: Robust system for cable strain relief in the control cabinet, consisting of four retaining brackets and a mounting bracket. The retaining brackets are available to fit all sizes of MSMC cable clamps. The mounting bracket is designed for MSMC 30-46 and 44-55 and is mounted on the base plate. In combination with the KEL-DPF 50 cable entry, even large, heavy cables can be reliably fixed and strain-relieved after being routed through the switch cabinet base.

NT-HD-SST-P, SCREWS AND NUTS HYG

NT-HD-SST-P, SCREWS AND NUTS HYG

NT-HD-SST-P, SCREWS AND NUTS HYG

TERM BLK PLUG 4POS 3.5MM BLUE

TERM BLK PLUG 4POS 3.5MM GRN YLW

CONN TERM BLK END PLATE GRAY

TERM BLK PLUG 4POS 3.5MM GRAY

TERM BLK PLUG 4POS 3.5MM BLUE

3212443

PTTB 1 5/S/2P BK

PTTB 1 5/S/2P BK

TERM BLK PLUG 4POS 3.5MM GRN YLW

TERM BLK PLUG 4POS 3.5MM GRAY

CONN TERM BLK END PLATE GRAY

TERM BLOCK PLUG 1POS STR

TERM BLOCK PLUG 1POS STR

TERM BLOCK PLUG 1POS STR

HEAT SHRINK MARKER SLEEVE

HEAT SHRINK MARKER SLEEVE