2380

Производится

Thru-beam sensor, 20 m detection range, infrared light, light/dark on, DC version, NPN output, sensitivity adjuster, pre-fault output, terminal compartment

Спросить AI FAE

Все аналоги

Полный отчёт

Технические параметры

Питание
No-load supply current	I 0 \| ≤ 20 mA (device)
Operating voltage	U B \| 10 ... 30 V DC
Switching current	max. 200 mA , resistive load
Switching voltage	≤ 30 V DC
Voltage drop	U d \| ≤ 3 V
Характеристики по постоянному и переменному току
Ripple	10 %
Switching frequency	f \| ≤ 300 Hz
Time delay before availability	t v \| ≤ 300 ms
Условия эксплуатации и корпус
Ambient temperature	-25 ... 55 °C (-13 ... 131 °F)
Height	64 mm
Height 64 mm Width 25 mm Depth 75 mm	Height \| 64 mm \| Width \| 25 mm \| Depth \| 75 mm
Storage temperature	-40 ... 70 °C (-40 ... 158 °F)
Другое
Adjustment range	2 ... 25 m
Ambient light limit	IEC / EN 60947-5-2 , 10000 Lux
Approvals	CE
Connection	terminal compartment PG9 , ≤ 0.75 mm 2
Control elements	Sensing range adjuster, light-on/dark-on changeover switch
Degree of protection	IP54
Depth	75 mm
Diagnostic Coverage (DC)	0 %
Effective detection range	0 ... 20 m
Emitter	LD39/116
Function indicator	LED yellow: switching state (receiver) LED red: pre-fault indicator, flashing (receiver)
Housing	PBT
Housing PBT Optical face PMMA	Housing \| PBT \| Optical face \| PMMA
Light source	LED
Light type	modulated infrared light
Mass	Emitter: approx. 90 g receiver: approx. 100 g
Mission Time (T M )	20 a
MTTF d	800 a
Operation indicator	LED red (emitter)
Optical face	PMMA
Product standard	EN 60947-5-2
Receiver	LV39/30/40a/116/126a
Reference target	receiver
Response time	≤ 1.5 ms
Scope of delivery	Mounting aid
Signal output	1 NPN output, short-circuit protected, reverse polarity protected, open collector
Stability alarm output	1 NPN, active when falling short of operating reserve
Switching type	light/dark on
Threshold detection range	25 m
Width	25 mm

Изображения

Фото · Каталог ChipCross

Документы

К этому компоненту пока не привязаны документы.